Accelerator McNett COTOL 240 plus 30 ml | Repairs and maintenance

Product details Accelerator McNett COTOL 240 PLUS 30 ml

COTOL 240 is a polymerization accelerator for polyurethane-based adhesives.

So it is an accelerator for SEAMGRIM / AQUASURE / FREESOLE adhesives and sealants. Reduces polymerization time from 24-48 hours to approximately 2 hours. It significantly reduces the viscosity of the glue or putty with which it is mixed. Dripping hazard.

Contents: 30 ml

We highly recommend purchasing Aquasure 250 ml and Aquasure 28 ml.

In case you want to achieve a thinner substance for fabrics, the ratio is 1:1. If you want a thicker substance as a second layer or for hard surfaces (rubber, shoes, cuffs), then the ratio is 1:3. 3 parts glue and 1 part accelerator.

Flammable liquid and vapors. It can cause death if swallowed and enters the respiratory tract. It irritates the skin. Causes serious eye irritation. May cause respiratory irritation. May cause organ damage through prolonged or repeated exposure. Harmful in contact with skin or by inhalation. If medical attention is needed, have the product packaging or label on hand. Keep out of reach of children. Protect from heat, hot surfaces, sparks, open flames and other sources of ignition, no smoking. Use only outdoors or in well-ventilated areas. IF SWALLOWED: Call a POISON CENTER/physician immediately. Do not induce vomiting. Dispose of contents/packaging according to hazardous waste regulations.