Trilaminate suit LIGHT PROTECT | Diving suits

Product details Dry trilaminate suit Agama LIGHT PROTECT

The AGAMA LIGHT PROTECT suit is a new model from the AGAMA range of dry trilaminate work suits. It is suitable for year-round work of firefighters, police and rescuers. The suit is made of light trilaminate material, which is quick-drying and easy to decontaminate. The suit is equipped with boots, which protect the user against external mechanical influences.

• The AGAMA LIGHT PROTECT suit is made of trilaminate material from the English company FOTHERGILL POLYCOM.
• Material composition: three-layer material with outer and inner nylon fabric and a rubber membrane in the middle.
• Weight: 225 - 255 g / m ² .
• Durability: maintaining constant material properties up to -15 ° C.
• The construction of the suit consists of a so-called telescopic torso, in which the length of the suit adapts to the length of the user's body without restricting his movement.
• The seams of the suit are sewn and ironed on the underside with a special 28 mm waterproof tape.
• Waterproof zipper: plastic TIZIP MASTER SEAL 10 is located on the front of the suit, covered with a leg with a plastic zipper.
• Braces: inner rubber braces are part of the suit.
• Buckle strap with buckle: fastens the front and rear upper part.
• Reinforcement: the suit is reinforced in the area of the seat and knees with cordura, which is extremely resistant to abrasion.
• Sizes: 15 standard sizes or customized.
• Shoes: boots with steel insole and toe.
• Cuffs, shoes, hood, valves, pocket: see standard or alternative design.
• Note If the shoe is embossed in size 44, 45 or 44/45, it is always the same size.

The suit is manufactured in accordance with the Declaration of Conformity.

How to measure all suits

Instructions for the treatment of TIZIPU - urgent information

Due to the fact that there were incorrect instructions for the treatment of TIZIP for products other than diving suits on the Internet, we warn users who have a plastic TIZIP zipper installed in their diving or other suit to pay the following attention to its treatment.

TIZIP must be treated according to the instructions that come with each zipper lubricant. Never lubricate the zipper along its entire length , but only in the docking area. Apply the lubricant carefully to the surface on the front and back of the lock, as well as inside at the junction of the zip chains.

We recommend treating the zipper, for example, after every third dive, etc. In case of contamination of the teeth, use only soapy water and a soft brush to clean them. Never clean Tizip with any petrol, toluene or chemical. This procedure will definitely damage the polyurethane layer under the teeth, which will subsequently crack, peel off and break the watertightness of the teeth.
TIZIPU manufacturer's notice: Never use wax or silicone spray, which may contain solvent-based substances, for lubrication.