Dry suits and accessories Fabric, components for divers

Dry waterproof zipper for fishing pants TIZIP MASTERSEAL 50 cm - 50 cm

Dry waterproof zipper for fishing pants TIZIP MASTERSEAL 50 cm - 50 cm
IN STOCK
Dry waterproof zipper for fishing pants TIZIP MASTERSEAL 50 cm - 50 cm
Dry waterproof zipper for fishing pants TIZIP MASTERSEAL 50 cm - 50 cm

Dry waterproof zipper for fishing pants TIZIP MASTERSEAL 50 cm - 50 cm

Brand: Titex

The zipper allows full opening on one side, see picture. TIZIP Masterseal 10 is made of high-strength fabric, coated with thermoplastic polyurethane. Solid plastic teeth are secured with tape. Zipper fasteners keep the sealing edges airtight. The tapes are welded and glued. The slider is made…

in stock

66.89 €

Choose your variant

Product details Dry waterproof zipper for fishing pants TIZIP MASTERSEAL 50 cm - 50 cm

  • The zipper allows full opening on one side, see picture.
  • TIZIP Masterseal 10 is made of high-strength fabric, coated with thermoplastic polyurethane.
  • Solid plastic teeth are secured with tape.
  • Zipper fasteners keep the sealing edges airtight.
  • The tapes are welded and glued.
  • The slider is made of a metal alloy that does not cause irritation and is also resistant to salt water.
  • When moving, the slider does not touch the tape or the sealing edge, which prevents abrasion of the fabric during frequent use.
  • The zipper is very flexible, light and resistant to many damage, not even a problem of tight underwear or dirt.
  • Maintenance is simple, only water and a brush are enough.
  • Only thorough lubrication and closing of the zipper into the zipper lock is important.

 

Instructions for the treatment of TIZIPU:

Due to the fact that there were incorrect instructions for the treatment of TIZIP for products other than diving suits on the Internet, we warn users who have a plastic TIZIP zipper installed in their diving or other suit to pay the following attention to its treatment.

TIZIP must be treated according to the instructions that come with each zipper lubricant.
Never lubricate the zipper along its entire length, but only in the docking area. Apply the lubricant carefully to the surface on the front and back of the lock, as well as inside at the junction of the zip chains. We recommend treating the zipper, for example, after every third dive, etc. In case of contamination of the teeth, use only soapy water and a soft brush to clean them. Never clean TIZIP with any petrol, toluene or chemical. This procedure will definitely damage the polyurethane layer under the teeth, which will subsequently crack, peel off and break the watertightness of the teeth.
TIZIPU manufacturer's notice: Never use wax or silicone spray, which may contain solvent-based substances, for lubrication.