Dry work suit Agama AQUATIC | For working under water

Product details Dry Working Suit Agama AQUATIC - L/43

The AGAMA AQUATIC suit is an innovated type of AGAMA PARTNER suit. It was developed based on user feedback and requirements for faster dressing. It is a waterproof lightweight work suit designed for water interventions. The suit is equipped with safety boots, which protect the user against external mechanical influences.

• The AGAMA AQUATIC suit is made of waterproof 100% nylon material, HA2218, with a Tricot inner finish.
• Weight: 180 - 200 g / m ² .
• Water column: 20000 mm H ₂ O.
• Vapor permeability: 3000 g / m ^2/24 hr.
• Resistance of the material in water partially contaminated with petroleum products, maintaining constant material properties up to -15 ° C.
• The construction of the suit consists of an overall overalls with an adjustable waist.
• The hood is made of super roof neoprene 0.3 mm, provides thermal comfort.
• Can also be used under the user's helmet, does not restrict head movement even when removed.
• The seams of the suit are sewn and ironed on the underside with a special 24 mm waterproof tape.
• Waterproof zipper: plastic TIZIP is located on the front of the suit, it is not covered by a layer.
• Braces: inner rubber braces are part of the suit.
• Safety reflective features: on trousers, sleeves, shoulders and back.
• Reinforcement: the suit is reinforced in the area of the seat and knees with cordura, which is extremely resistant to abrasion.
• Sizes: L, XL, 2XL (the cut of the suit will cover the height and width requirements of most users). Size XL is the most common and most frequently ordered size.
• We recommend using the Technical 85 g suit for the Partner suit.
• Cuffs, shoes, hood, valves, pocket: standard or alternative design.
• Note: if the size 44, 45 or 44/45 is embossed on the shoe, it is always the same size.
• AGAMA AQUATIC is manufactured in accordance with the Declaration of Conformity.

How to measure all suits - Downloadable table.

Instructions for the treatment of TIZIPU - urgent information
Due to the fact that there were incorrect instructions for the treatment of TIZIP for products other than diving suits on the Internet, we warn users who have a plastic TIZIP zipper installed in their diving or other suit to pay the following attention to its treatment.

TIZIP must be treated according to the instructions that come with each zipper lubricant.
Never lubricate the zipper along its entire length , but only in the docking area. Apply the lubricant carefully to the surface on the front and back of the lock, as well as inside at the junction of the zip chains.
We recommend treating the zipper, for example, after every third dive, etc. In case of contamination of the teeth, use only soapy water and a soft brush to clean them. Never clean Tizip with any petrol, toluene or chemical. This procedure will definitely damage the polyurethane layer under the teeth, which will subsequently crack, peel off and break the watertightness of the teeth.
TIZIPU manufacturer's notice: Never use wax or silicone spray, which may contain solvent-based substances, for lubrication.

Types of shoes for the suit:
All types are reinforced with steel.

Novesta boots

• The shoe is insulated from the inside with neoprene
• Wider cut shoes
• Orange color
• Available sizes: 40/41, 42, 43/44, 45/46, 47, 48