Silicone zipper lubricant TIZIP 8 g | Maintenance of zippers

Product details Silicon zipper lubricant TIZIP 8 g

Silicone product weighing 8 g for lubricating zippers for TIZIP drysuits.

Instructions for using the lubricant:

• Zippers must be lubricated only at the "lock" point (the end of the zipper) and on the first two teeth.
• NEVER along the entire length of the zipper.
• Please use only TIZIP lubricant, other lubricants may break the PE layer under the teeth of the zipper.
• Apply carefully to the surface of the inside and outside of the lock, as well as inside, where the zipper chains join.
• Reapply whenever the area is dry during use and always before long-term storage.

Check the teeth of the TIZIPU regularly (e.g. every 3rd - 4th dive), if dirt is found on the teeth of the zipper, clean with a soft brush and water until the dirt is completely removed. Then lubricate with lubricant.

If you dive in dirty water or put your suit on dirty ground, then the zipper must be checked after each dive. Use a soft brush and water with liquid detergent to clean your teeth. Do not use any chemicals. Clean the space between the teeth, on the teeth and in the area of the lock, remove impurities such as sand, mud, fiber residues from the undercoat, and only then apply the lubricant to the lock area again.

Video tutorial on how to grease zippers: